Water-based PU, modified bitumen membrane
Description
HY-609_U6 Hypercoat is water-based PU with modified bitumen, moisture cured polyurethane membrane. With a mix of high performing water-based PU resin from overseas, imported high quality natural rubber filler and emulsified asphalt to perform superior water resistance.
Use
- Waterproofing applications on roof, bathroom, terrace, underground external wall, and gardening area.
- Can be followed by waterproofing, heat insulation protective coatings.
Feature
- It is a breathable material and can be applied to damp surfaces.
- Has particularly good adhesion with cement so can be used directly as a soft-base for tile-laying.
- Can be subjected to long periods of immersion in water without bubbling.
Note
- The product should not be applied at temperatures below +5℃or above +35℃, surface humidity content >15%, or if humid conditions are expected to prevail during the curing period of the paint film.
- It is not exposable, please keep it from sunlight and hot environment; the heat will shorten the life span of the product.
- It is natural if setting phenomenon has occurred, just stir the material thoroughly before using.
- It is not compatible with silicone, please avoid any contact or using the two at the same time. HY-609_U6 contains asphalt which will contaminate silicone, causing stains on the object. (e.g. during window glazing application, silicone sealant is used to seal the parameter; if the sealant contact with HY-609_U6, stain marks will show up in a short period of time and almost impossible to remove)