High performance, waterproofing liquid membrane
Description
HY-688 Dryflex is consisted of hybrid polymer with modified EVA and acrylic to reach the range of high performance, one-component, seamless, and cold-applied liquid waterproofing membrane.
Use
- Indoor: bathroom, kitchen & terrace
- Outdoor: roof, floor joint, parapet and wall
Feature
- Single pack, liquid-applied, easy to apply.
- Excellent hydrolysis resistance.
- Still can curing when apply on the moisture surface without observed water.
- The middle layer of the tile, the top coating or each cement-based finished surface.
Note
- The product should not be applied at temperatures below 5℃ or above 35℃, surface humidity content >15%, or if humid conditions are expected to prevail during the curing period of the paint film. Otherwise, blisters will be created on the surface of the coating, leading to aesthetic issues.
- If under specific ambient conditions: extreme weather, high heat, strong sunlight, fierce-dry winds, or the application surface is under high absorbing situation, the time of application will be shortened.
- AFTEK auxiliary product: AFTEK exclusive primer.
- Substrate types to be primed in advance:
- Sandy surface or full of powder-like ingredients
- Very absorbent and brittle surfaces
- Damp concretes
- Suggest thickness is 1mm under two-times applied. After more than 1hour or the surface drying, no sticking, the second layer could be applied.